Product: Safe-T-Lanyard Pull Wire Rope – Stainless Steel

Find out more, call today +61 3 8587 9111

Request a Quote

Conveyor Safety Control Solution, Safe-T-Lanyard Stainless Steel Pull Wire Rope is a UV Stable Red Polyurethane coated 316 Stainless Steel 3mm ID x 5mm OD 7 x 19 construction Independent Wire Rope Core (IWRC), designed and manufactured for the purpose of a lanyard emergency stop pull wire system.

Safe-T-Lanyard is designed to comply with the Machinery Standards AS 4024.3610 2015 Clause 2.10.6.1

Pull wire emergency stops, general (Pull wires should be coloured red) and 2.10.6.2 (e) Materials used are of adequate strength, protected against environmental conditions and suitable for handling without additional protection being worn by operators. Note: if the environment the pull wire is located it may cause visual loss of its location then consideration should be given to add additional notification via reflective signs at no more than 30m intervals. See K-SAF-STP-ES, K-SAF-STG-ES or K-SAF-STL-ES.

The Actuator of a Lanyard switch is the Pull Wire thus it is made in a Red UV stable Polyurethane so to withstand the harsh environments that the wires are placed in, without cracking of the cover or fading of the colour.  Once the Safe-T-Lanyard is fitted to a Safe-T-Pull Lanyard Switch and run through Safe-T-Guide Rope Guides and installed as per the switch Installation Instruction, you will then make sure your site is complying to the relevant Australian or International Standards for conveyor Emergency Stops.

Refer to our other Conveyor Safety & Control Product Solutions.

Read about Kinder’s building block for a global foundation.

Related Products